Monday, April 27, 2020

Interesting SAWDIS Kite Project to promote science and technology aka Kite Carrying Amateur Radio

SAWDIS - KITE WEATHER RESEARCH PROJECT

Well time has now arrived to re-start the KITE PROJECT but under a new umbrella. This project will be launched in several fases and I will update these pages as the project unfolds.

SAWDIS - KITE CARRYING WEATHER RESEARCH INSTRUMENTS PROJECT, is a Southern Cape based project that promotes science and education by exploring different kinds of frontiers with medium to high altitude kites. Several individuals will assist me and their names and contribution towards the project will be displayed under this topic. We are simply a few individuals with similar interests and a common goal to experiment, which anyone is welcome to participate in. Our aim is to help promote education, experimentation amongst interested people in South Africa.

BACKGROUND:

I always had this crazy idea of in sending “something” up in the sky with a payload on board. I had a look at several helium balloon and rocket projects but due to various Governmental and Aviation “red tape” in this country, I decided the next best option for the time being would be to use a kite to carry the payload. You might say what a waste of time but did you know that a World Kite Altitude Record of 14,509Ft (4422 meters) was set by Richard Synergy in Kincardine, Ontario, August 12, 2000 for a single kite. Needless to say I am not currently interest to better the record. The aim of this project is to build a kite that will carry a weather and science payload.

START OF THE PROJECT:

A diary of events and an inventory list of scheduled activities will also be kept  to ensure that every aspect receive the necessary attention. I will not go into all the detail of the project as time and space does not allow it.

MAIN ACTIVITIES RELATING TO THE PROJECT:

1. KITE(S)
2. PAYLOAD(S)
3. FLIGHTS
4. RESULTS
5. RESEARCH
6. FINDINGS
7. FUTURE

KITE(S) FOR THE PROJECT:

Research on the Internet revealed many information on kites. I had the option to buy a ready-made kite or to build a kite for the project. It had to conform to certain specifications.
I decided on the DELTA KITE and to built it from scratch. The delta is a light wind kite, particularly suited to thermal cruising. It is relatively easy to construct and conveniently quick to assemble. Delta kites are single line triangle shaped kites that are sometimes called "bat" or "wing" kites, and are named for their resemblance of the Greek letter "Delta". A very efficient kite, the delta kite can float in lighter winds than most other kite shapes. The exceptional lift capabilities of the kite allow several kilograms of payload to be attached to the kite and/or tether. Just what we are looking for.

I am also looking at several variants of the Delta Kite for the project. The first experimental kite will however be a delta with the following specifications. (Please note that this kite is small and is only for test purposes.) If this kite "performs” satisfactory, a larger (6 meter) version will be constructed for the project.


Well thanks to the family the K.C.A.R prototype kite was build and is now ready for it's maiden flight. The decal is still to be affixed and a trimming here and there will see it ready for final testing.

Photo of DELTA I in flight:




Images: Johan van Aarde ( SAWDIS Weather Observer)  Click on images for larger view.

PROVISIONAL PAYLOAD FOR THE PROJECT:

The current suggestion is to accommodate the following equipment as a payload:

1. UHF TRACKING BEACON (INTERNAL AND EXTERNAL)
2. APRS TRACKING UNIT
3. TEMPERATURE SENSOR UNIT
4. FIXED DIGITAL OR DISPOSABLE CAMERA
5. BAROMETRIC, TEMPERATURE AND HUMIDITY CENSOR UNIT
6. WINDSPEED CENSOR UNIT

Some more info on these units:

UHF TRACKING BEACON: I intend using an AM UHF Transmitter (10mW)with temperature sensor unit. Not only will this provide for an internal beacon but I can also connect a beeper to the unit for external audio. The transmitter will also be used to transmit temperature data to a laptop computer.

APRS TRACKING UNIT: I intend using the TinyTrak 4 unit. The TinyTrak4 (TT4) is a radio interface capable of transmitting and receiving position and other digital information over a two-way FM radio. The TinyTrak4 can read temperature, battery voltage, and other analog and digital sources which makes it ideal for this project.

TEMPERATURE SENSOR UNIT: This unit will work with the TinyTrak 4 unit and will transmit temperature readings via the beacon.

FIXED DIGITAL OR DISPOSABLE CAMERA: I will most probably use a disposable camera to start with. (Cannot afford to crash a digital camera at this stage) It is envisage to take pictures of the surroundings and activities on the ground. Will have to use a servo with some kind of transmitter to activate the camera.

BAROMETRIC SENSOR UNIT:  I will use a Oregon Scientific Wireless Baro-Thermo-Hygro sensor unit to display barometric pressure, temperature and humidity information.  This info will displayed on a Oregon Scientific Weather Station at the "airfield".

WINDSPEED SENSOR UNIT:   Windspeed will be recorded by a Speedtech Instruments unit.  This unit can display a variety of data in different settings.

Further updates to follow.

Constructing a DELTA-CONYNE KITE

With the weather being fowl this last couple of days, it was ideal to start work on this post on how to build a DELTA-CONYNE KITE.  I received several requests to make the plan availble as many would like to build this kite for their grand children.  I drew the plans for this kite on the 16 June 2008.   Here are the dimensions of the kite.


(Click on image for large view.)

The kite is 2.8 meters (9 Ft) from tip to tip. All measurements in centimeters.  For those interested here is a short overview of the kite:

The Delta Conyne is a kite which gained popularity in the late Seventies and early Eighties. It is a hybrid kite, being a combination of a Conyne, which is a box kite, and a Delta. The kite is very stable and will fly well in a large variety of winds. The lifting power of a Delta combined with the stability of a box kite, these kites are always the fastest climbers in altitude races. This kite is capable of lifting large payloads and is truly impressive in the sky.

In a moderate to stiff wind it flies well and will lift a reasonable payload. To give you a rough idea say the payload weighs in at roughly 820 grams. I can fly the Delta Conyne in any wind from about 10 km per hour but to lift the payload its nearer to 15 km per hour to be safe. Years ago I invested in a portable anemometer which will now come in very handy.  Now building this kite was real fun and guess what I had to sew the kite myself. The YL point blank refused and I had to get behind the sewing machine. Learned something new and can now operate a sewing machine.........yep and this does not make me a lesser man. At least I can now mend my own clothes!!

This project has really focused my attention on flying kites as a past time. I have learned a lot about flying kites and also the many uses for kites. Now you may ask why fly a kite? Each flight is a journey of exploration. Each flight is different. And the flyer is not merely a passive observer, either. The responsible flyer is in control at all times (or should be): letting out line; not letting out line; winding line in - to catch lift, turn, take out more line, move to another spot in search of a thermal - all done deliberately by the flyer in control. Kites are controlled by pulling in or letting out the line. With the right kite for the wind, and the right line, it's very relaxing and rewarding. Flying a kite for an equal number of hours showed a cost effective means of reducing stress. It was also the best in terms of overall effectiveness, regardless of cost. A further bonus is to combine kite flying with Amateur Radio. Marconi lead the pioneering actions as far back as 1901 - Guglielmo Marconi used a kite to lift an aerial to make his historical radio link between North America and Europe.
Enough of history, I must now sit and wait for the weather to be conducive for kite flying. The next step will be to manufacture a Picavet. The Picavet will provide a level platform for the science payload.

The maiden flight was a great success and I am impressed by the handling and lifting capability of this kite.    My thanks go to Johan van Aarde for the photo's and I am sure you will agree that they are of outstanding quality.   Here are some of the photos that were taken of the Delta Conyne 1 in flight.





Images: Johan van Aarde (Click on images for larger view.)


Constructing the PICAVET.

I received several e-mails from blog readers wanting to know what a PICAVET is. The Picavet is named after a French inventor in the early 20 th century. I will attach the payload to the kite line and not the kite. The angle of the line to the kite is constantly changing. To provide a level platform for the payload I will use the Picavet. The payload hangs beneath the Picavet cross from a bolt that is fastened through a hole at the center of the cross. The Picavet has an inherent dampening effect as part of its design. As the kite line changes angles a Picavet moves to the new level position and stops. The lines of the Picavet also provide dampening of wind induced vibrations on the kite line. The diagrams below show the major parts of the Picavet.



I constructed a 150mm x 40mm x 1.6mm Picavet Cross and used 5 eyebolts, 1.5mm line, small washer and two keyholder rings. To prevent the eyebolts from loosening in the wind I used lock nuts on both sides of the cross.





I contacted Johan ZS2I and we decided to go ahead with the testflight. Myself , Johan ZS2I and Sewes set out to the "airfield". We first decided to let the kite fly without the picavet. I took the kite to approx. 100 meters. It flew beautifully and just "sit" up there. Very little movement. The wind at that stage was blowing between 10 and 18 km/h. The next test was to attach the picavet. The picavet was tied to the kite line about 4 meters from the kite and two fishing sinkers were attached to the picavet. Needless to say that the distance from the kite to the picavet was to short. The "payload" swinged fiercely from side to side. We hauled the kite in and added another sinker and lengthened the distance between the kite and picavet to about 10 meters. The wind took the kite and it just went up and up. Johan ZS2I : "Die kite wil net op en op, gee hom lyn, laat hom gaan. All in the name of science! "

It went up to about 35 meters but then disaster struck, the wind was not strong enough to carry the payload (348g) and line any higher. Not deterred by the light wind, we decided to do another experiment. We removed the sinkers and attach a portable anemometer and temperature sensor to the picavet. The kite went up again to about 40 meters. The anemometer was adjusted to give us the maximum strength of the wind and temperature. After about 15 minutes the kite was lowered and the measurement showed the maximum wind speed as 31,3 km/h and temperature as 17.7 Degrees Celsius. These measurements were taken 35 meters above the ground. The kite was again send up to about 35 meters with the sinker payload. Then disaster struck a second time. With the approaching cold front the wind suddenly picked up in strength. It got so strong that it was impossible to hold onto and I decided to give it line to release the pressure. The wind increased in strength and the kite shot up to approx 300 meters. It entered the "Stratosphere". You don't believe me. Looking at the photo (taken from a light aircraft), you can just see the earth at the bottom of the photo.


Photo: Kite flying above the clouds in the "Stratosphere". Earth visible at the bottom of the picture.

Yep, we then hit the Statosphere. The wind suddenly decreased and the kite glided through the clouds back to the "airfield". (Note: Just kidding about the Stratosphere and flight above clouds but a light aircraft did explore the strange object in the sky. Luckily it is red and white obviously noticeable from quite high up. We flew for another 15 minutes and called it a day after the wind decreased even further.

What did we learn:

1. The wind speed to carry a 557g payload must be between 35 and 45 km/h.
2. The size of the kite in light wind (10- 18 km/h) should be at least 5 meters from tip to tip.
3. The 2.5 mm kite line that is currently used, is to thick and to heavy for the 2.8 meter Delta Conyne.
4. There is a need for at least three different sizes of kites to fly in different wind strengths.
5. Leave enough line length between the kite and the picavet to ensure a steady flight.

Although this flight might sound dull and useless, we learn from experience, something we definitely will need when the time comes to fly the real payload.
We once again had great fun. Many thanks once again to Johan van Aarde ZS2I who took photo's during the flight.


Testing the PICAVET in stronger wind.


Testing the PICAVET in stronger wind.

Well this time the SA Weather Service got it right. A 42.8 km North Westerly in Mossel Bay at last. Myself and Sewes just returned from the "airfield" where we tested the 2.8m Delta-Conyne. Oh.......what an experience!!! Sewes was the anchor man and I did the flying. No time for errors here and you had to hold on for dear life. The wind just took the kite and within a couple of seconds it was soaring around 50 meters. I soon realized that I needed all the experience I have to keep it from going up and up. I slowly started to haul it in. The leather gloves bear the scars of the strong wind. Just imagine if you had to fly the kite with your bear hands....totally impossible....you would have no fingers left. When we had it about 20 meters up I decided to add the Picavet with 5 sinkers and anemometer (550g). Guess what when I released the rope it just ripped the sinkers up into the air like a balloon. The kite would easily have lifted 800 grams. The wind was getting stronger and we decided play it safe and to bring the kite down. Once down I decided to take of the payload and let the kite go one more time. It shot up in the air danced once or twice and than a loud bang. The kite folded it's wings like a duck that was shot and started to come down like a wounded duck. It landed and we decided to call it a day. Once we got to the kite I noticed that the main spar had snapped in the strong wind and that's what caused the kite to fold it's wings. The anemometer measured 42.8km. We packed up and headed home.

Some thoughts:

1. Ensure that your equipment can withstand the wind you fly in.
2. If you use ordinary wooden dowels than a 30 km wind is to strong.
3. Do not fly the kite in strong winds if you are inexperienced.
4. Ensure that you can control the kite in this type of wind.
5. Use fiber glass- or carbon fiber spars.
6. Never fly a kite alone.
7. There is no time for errors.
8. Take care not being caught in the kite line.
9. Wear the proper protection gear.
10. Do not fly a kite near houses or overhead power lines.

We had a great time flying the Delta-Conyne in the strong wind. I would however suggest that you do not fly this kite in more than 45km winds. However we gained some good flying experience and will make changes to the kite spars and to the kite itself.


Aquilone 1 Payload Construction

The SAWDIS Kite Project is well under way.  I am currently busy with the payload construction and hope to make the first payload test by the end of this week.  Here is a few images of the different electronic projects that will be installed in the payload bay.


GPS Antenna installed on PCB

GPS UBlox unit which will be connected to the Modified TinyTrak1 board for APRS tracking

Modified TinyTrak1 PCB which forms part of the APRS Tracker Unit

Meteo Board with Barometer, Hygrometer, Temperature meter and transmitter to transmit weather info to computer.

Transmitter for APRS Tracker unit.  The transmitter will transmit the exact location of the kite.

RS232 converter for converting GPS data.

The payload tray showing two compartments.  There will be 6 compartments in the final tray assembly.

The payload tray (Side view.)

The payload housing with two end caps.

The payload bay with two end caps (Side view.)

The payload bay and tray.


The payload bay and tray. (Side view.)

(Click on images for larger view.)

Assembly of the Aqualone 1 payload

Great news. I finished the assembly of the kite payload.  The "smoke test" on the SAWDIS Auqualone 1 Kite Payload was performed yesterday afternoon.  The result:  No smoke!  The payload performs well and final testing will be done later today.

I still need to build antennas for both the APRS Tracker and the WX Transmitter.  Photos of the payload will soon be published.  I am looking forward to the first flight of the SAWDIS Auqualone 1 Kite Payload.  All the transmitted data of the SAWDIS Auqualone 1 Kite Payload will be available on the Internet in real time format.  More information on this in future updates.

The Aquilone 1 Payload

The SAWDIS Scientific Kite Payload

The payload is now fully constructed and operational as can be seen from the images. The first flight of the Aquilone will soon be taking place and I will announce the date and time in due coarse. I still need to compile a few flight maps for the APRS unit to reflect the exact position of the kite. The weather data will be fed into a local weather station and then displayed on the Weather Underground web-site. Once all the software programs have been installed and updated we will be ready for the first test flight.

The payload cover with insignia and SAWDIS payload

The GPS Antenna and GPS Unit

The RS232 Converter and TinyTrak 1 Controller

The Baro -  Thermo - Hygro unit

The Transmitter, Battery and Power Controller Units

The Power Controller Display

The APRS Antenna attached to the payload

The SAWDIS Kite Payload exposed

Image: SAWDIS (Click on images for larger view.)



- ZS1I

Reboot Amateur Radio Group WSPR RX Lockdown Challenge:


Image: Keverne  ZS1ABU from George is currently leading the Reboot Amateur Radio WSPR Challenge. Distance: 16 855km

Ok here is a challenge to those who do not want to swallow an egg, sugar or a drink. The following challenge is hereby launched and anybody is welcome to participate. I challenge all radio amateurs in South Africa to render proof of the longest Rx distance "contact" using WSPR Firmware on any amateur radio band. It will be required to show a map and screenprint (including date, time and band) of the distance received. (RX only) Currently Keverne ZS1ABU holds the record with an RX distance of 16 855km The RX WSPR challenge will continue until the current lockdown is lifted by the Government. I ask that as many as possible join in on the fun! The FT8, FT8CALL and other digital radio amateurs are requested to let WSPR run when they are not working DX. That way you can also participate when not calling DX. Please, if you do not extend/beat the current distance you are more than welcome to post images here or on the Reboot Amateur Radio Whatsapp Group of your attempts. Lets have some fun!!

Proof: Screenprint of your WSPR program reflecting the station received and screenprint of Spot Map - http://wspr.aprsinfo.com/


Installation packages for WSJT-X 2.1.2
Windows:
Version 2.1.2: wsjtx-2.1.2-win32.exe. (32-bit Vista, Win 7, Win 8, and Win 10).
Version 2.1.2: wsjtx-2.1.2-win64.exe. (64-bit Vista, Win 7, Win 8, and Win 10).

Here is the link: https://physics.princeton.edu/pulsar/K1JT/wsjtx.html Just go down 3/4 of the page and you will see the above downloads. Choose what applicable to you computer.


IMPORTANT NOTICE: Postponement and Cancellation of the Reboot Coffee Drink Events due to Covid19 Virus

UPDATE:  I received several comments/emails on why I over-react in closing down Reboot Coffee Drink Events as per above post. It is plain and simple, I am the organizer of the event. I will not put any of my fellow radio amateurs and their families in harms way be it the virus or any other risk or incident. Apart from this I have important information at hand that contributed to my decision to postpone the events. I am aware that my decision is pro-active, but that is what is now needed to keep the level of infection as low as possible as to not put strain on hospitals and medical staff. No I am not scared of the virus.  I am personally of the opinion that I made the correct conscious decision. I am not willing to debate this topic as I will not reverse my decision in this regard.

IMPORTANT NOTICE: Postponement and Cancellation of the Reboot Coffee Drink Events:

Notice is hereby given that the Reboot Coffee Drink that was scheduled for the 21 March 2020 in George has been cancelled and that all other Coffee Drink sessions have been postponed until the end of May 2020.

As the Corona Virus  (COVID-19) outbreak continues to spread, more events are being cancelled or postponed amid travel restrictions and increasing health warnings, with the World Health Organization on Wednesday (11 March 2020) officially declaring a pandemic.

The COVID-19 virus had sickened more than 118,000 cases in 114 countries, with 4,291 deaths, according to the WHO. The number of confirmed cases nationwide (South Africa) escalated and evolved rapidly to 17 according to the  Health Minister Zweli Mkhize. South Africa has recorded 4 new cases overnight, one of them being the first instance of local transmission.

The World Health Organization said in the days and weeks ahead, it expected to see the number of cases, the number of deaths and the number of affected countries climb even higher.

In light of credible sources and the fact that the participating radio amateurs in the coffee drink event is in the high risk group, I have taken the very difficult decision to cancel and postpone the Coffee Drink Sessions until the end of May 2020 in the interest of every radio amateur participating in the Coffee Drink Events in the Southern Cape.

A further assessment will be done early June 2020 and I will inform all when the coffee drink session will resume again.

We need to be pro-active and not re-active!!

Regards

Johan Terblanche ZS1I
Admin: Reboot Coffee Drink and Reboot Amateur Radio Group


BELANGRIKE KENNISGEWING: Uitstel en Kansellasie van die Reboot Coffee Drink-geleenthede:


Hiermee word kennis gegee dat die Reboot Koffie Drink wat op 21 Maart 2020 in George beplan is, gekanselleer is en dat alle ander koffie drink sessies uitgestel is tot einde Mei 2020.

Namate die uitbraak van Corona Virus (COVID-19) steeds versprei, word meer geleenthede gekanselleer of uitgestel te midde van reisbeperkings en toenemende waarskuwings oor gesondheid, met die Wêreld Gesondheids Organisasie wat Woensdag (11 Maart 2020) amptelik 'n pandemie verklaar het.

Volgens die WGO het die COVID-19-virus daartoe gelei dat meer as 118,000 gevalle in 114 lande aangemeld is, met 4 291 sterfgevalle tot dusver. Volgens die Minister van Gesondheid, Zweli Mkhize, het die aantal bevestigde gevalle landwyd (Suid-Afrika) vinnig gestyg tot 17 . Suid-Afrika het oornag 4 nuwe gevalle aangeteken, waarvan een die eerste instansie van plaaslike transmissie was.

Die Wêreld Gesondheids Organisasie (WGO) het gesê dat daar in die dae en weke wat voorlê, die aantal gevalle, die aantal sterftes en die aantal lande wat geraak word, selfs hoër sal styg.

In die lig van geloofwaardige bronne en die feit dat die deelnemende radio-amateurs aan die koffie drink geleentheid in die hoë risiko groep is, het ek die baie moeilike besluit geneem om die Koffie Drink sessies tot einde Mei 2020, te kanselleer en uit te stel in belang van elke radio-amateur wat aan die koffie drink geleenthede in die Suid-Kaap deelneem.

'n Verdere beoordeling sal vroeg in Junie 2020 gedoen word en sal ek almal in kennis stel wanneer die koffie drink sessies weer sal hervat.

Ons moet pro-aktief wees en nie re-aktief nie !!

Groete

Johan Terblanche ZS1I
Admin: Reboot Koffie Drink en Reboot Amateur Radio Groep

Reboot Amateur Radio is now active on Zello

The old AREDN Zello  channel has been changed to Reboot Amateur Radio and is now active. 
This channel is used: (1) To broadcast interesting amateur radio news and podcasts. (2) Have a nice chat or ragchew.

Further Information

 

Channel administrators (1) 


ZS1I-1

Mossel Bay, South Africa

English

Technology, Local, News

6 subscribers


Feedback: Reboot Amateur Radio WhatsApp Group – Reboot Coffee Drink Event 23 Februarie 2020 9am STARS Restaurant, Mossel Bay

The Reboot Amateur Radio WhatsApp Group as well as the Reboot Coffee Drink Event is open to all radio amateurs and prospective radio amateurs in South Africa. All our events are informal !! In other words no politics, no religion and no controversial or personal differences will be allowed or tolerated!!




Saturday 23 February 2020 at 9am was again an enjoyable and successful Coffee Drink session in Mossel Bay at STARS Restaurant. Once everybody bought the necessary refreshments the chin-wagging started!

Those present by way of mind: = 9

Johann ZS2BVD, Russel ZS2AHF, Francois ZS1Q, Abe ZS1ZS, Saney ZR1S, Danie ZS1DBJ, Johan ZS2I, Hentie ZS1LH and Thys ZS1TBP

Those present in the flesh: = 10

Beat ZS1HB, Chris ZS1M, Jimmy ZS1RB, Dave ZR1OAC, Nick ZS1N, Wessie ZS2A, Marie ZS1MEH, Andre ZS1AFB, Kevin ZS1ABU and Johan ZS1I.

All present were welcomed by the administrator of the Reboot Amateur Radio WhatsApp Group. This time there were a few formalities that needed to be finalized. The following were presented to those present:

  • Future Venues re: Mossel Bay/Great Brak River/George?
  • Reboot WhatsApp Group – Activities, projects, DX and HF Band Conditions.
  • The current administrator will be in Australia for April/Mei/June. Danie ZS1DBJ volunteered to assist with arrangements iro coffee drinks for the mentioned months. Thanks, Danie!!
  • Looking for a new administrator for the rest of the year. (July to November) Its important to rotate the administrator every so often, as new blood assure new ideas. Even if you can only assist for 1 or 2 months, it will be a new face and voice talking. I am sure many are sick and tired of my ugly face and voice. Andre ZS1AFB indicated that he is willing to take the reins from July to November. Thanks, Andre!!
  • Two new Group Admins will assist with the Reboot Amateur Radio WhatsApp Group. Jimmy ZS1RB and Keverne ZS1ABU indicated that they are willing to assist. They were duly appointed. Thanks, Jimmy and Keverne!!
  • Enquiry iro attendance by spouses of radio amateurs (husbands) who went silent key - They are most welcome at any of the Coffee Drink Sessions and so are any other YL’s of those radio amateurs attending the event.
  • Lucky Draws 2020.
  • Thanks and Appreciation.

It is impossible to provide all the finer and juicy details of this event. Moral of the story is to attend each and every coffee drink event, not to lose out. This event was surely the most interesting and educational held thus far and the main discussion point was Solar Power Systems.

Rondomtalie/Round Robin

  • Nick ZS1N – 40M Double Bazooka Antenna, SARL Field Day Contest, TH3 Antenna at Boggomsbaai, Solar Power Systems, Power Logger, Lithium Iron Battery, https://solaradvice.co.za/ Solar Power Setup by ZS4ZAC.
  • Dave ZR1OAC – Antenna Analyser Project, Measurement Techniques, Solar Power, Solar Panels, Optimum voltage for Inverter 300 volts.
  • Beat ZS1HB – Solar Power System, Installing a system, System for you home, Different types of batteries and costs. Most expensive is the battery bank of pack. Cellphone charger exploded. Luckily no fire.
  • Andre ZS1AFB - Solar Power System for Ham Radio, Solar Power System for your Home, Victron 5kw Inverter, Solar Power Batteries and Blue Solar, Knysna.
  • Wessie ZS2A – Former Boeing Pilot and nowadays Farmer, Rigs in the shack – Yaesu FT950 and FT1000MP, 289 DXCC confirmed entities. Antenna - Mosley Tri-Bander 20/15/10 35 years old, tower climbing is ou but trolly/cage to lift and lower the antenna is in. Digital Modes. Solar Power DIY, do your calculations first. Lead Acid Batteries not recommended for Solar Home Installations. They do not last long!!
  • Jimmy ZS1RB - Echolink is down in the Southern Cape but not for long. Busy building a new echolink system which will include 1:1 transformers. He received 6 new transformers at the coffee drink. Will also be using a new radio for Echolink.
  • Marie ZS1MEH – Very poor reception and transmission of the 600 Danabay Repeater at her QTH in Hartenbos Heuwels. Linking of the Danabay and George Repeater? Can easily access the 700 and if the 600 and 700 repeaters are linked it will solve problems of the radio amateurs that live in that area. Solar Power System installation at home.
  • Chris ZS1M – Windows 7 discontinued – other options like Linux Mint. 32 or 64 bit? Upgrade from Windows 7 to 10. 24 volt Inverters, Solar Power System for the home. Amount of solar panels?
  • Keverne ZS1ABU - Now living 4 months in George. Currently using a “Claus” mast to support HF antenna but no VHF setup yet. Good reception and coms to ZS6 and ZS5. Solar Power Systems for your house and shack. Currently using two units successfully. One in the shack and one in the house.
  • Johan ZS1I - 1950’s Hand drawn circuit diagram on material of a VFO Exciter Unit. Solar Power Systems.

Lucky Draws

Congratulations or is it sympathy to the 4 winners of the Lucky Draw Competition.

Nick ZS1N – Digital Camera
Dave ZR1OAC – Digital Camera
Chris ZS1M – Wall Clocks
Jimmy ZS1RB – Electric Plug Pullers.

Please see all the photos of the above discussions and demonstrations. As said before you need to attend the coffee drink sessions to get the finer detail and juicy bits. If you do not attend you will miss out on detail.

Finally:

I concluded the event by thanking everyone for attending the event.
I trust that everyone enjoyed the event and that everybody had a great time.

We look forward to the next Reboot Coffee event which will be held in George on the 21 March 2020 at 9 am. The venue in George will be Root Coffee Roasters.

73

Johan ZS1I
Mossel Bay
1 March 2020

Photo Album: 


Beat ZS1HB - Cellphone charger that exploded while charging.


Keverne ZS1ABU - 2 x Inverters as being used and constructed by him


Johan ZS1I - 1950’s Hand drawn circuit diagram on material of a VFO Exciter Unit.



Beat ZS1HB - Cellphone charger that exploded while charging.

 

Keverne ZS1ABU - 2 x Inverters as being used and constructed by him

Sunday, April 26, 2020

Terugvoer: Koffie Drink – Reboot Amateur Radio WhatsApp Groep – 25 Januarie 2020 – Root Coffee Roasters op George.

Die PDF weergawe kan hier afgelaai word. Klik HIER 



Die Reboot Amateur Radio WhatsApp Groep asook die Reboot Koffie Drink is oop vir alle radio amateurs en voornemende radio amateurs in Suid Afrika. Al ons byeenkomste is informeel van aard en geensins klub verwant of gedrewe nie. Net ‘n klomp radio amateurs en voornemende radio amateurs wat hulself geniet. Ons drink een keer per maand saam koffie en bespreek allerlei amateur radio aspekte. Daar is geen formele prosedures nie maar daar is wel drie voorwaardes: (1) Geen amateur- of lands politiek nie. (2) Geen godsdiens. (3) Geen kontroversie of persoonlike geskille nie. Net vet pret, lekker lag en amateur radio is aan die orde van die dag.

Die afgelope Saterdag, 25 Januarie 2020 om 9vm was weer ‘n genotvolle en suksesvolle byeenkoms vir radio- en voornemende radio amateurs in George by Root Coffee Roasters. Die weer het mooi saamgespeel en was daar 12 radio amateurs teenwoordig gewees. Soos voorheen was die “venue” weereens tot ons gebruik beskikbaar gestel vir solank as wat ons dit wou benut. Ek will van die geleentheid gebruik maak om beide eienaars van Root Coffee te bedank vir hulle gasvryheid en die beskikbaarstelling van hulle fasiliteit aan Reboot Amateur Radio.
Diegene teenwoordig in die gees: = 5

Chris ZS1M, Hentie ZS1LH, Mari ZS1MEH, Abe ZS1ZS, Wessie ZS2A en Nick ZS1N. Baie dankie aan diegene wat die moeite gedoen het om verskoning aan te teken. Dit wys dat julle belangstelling toon in Reboot- en Amateur Radio Aktiwiteite in sy geheel. Die feit dat julle verskoning aanteken word hoog op prys gestel.

Die teenwoordig in die vlees: = 12

Johan ZS2BVD, Russel ZS2AHF, John ZS1ZR, Willie ZS2CC, Andre ZS1AFB, Johan ZS2I, Johan ZS1I , Dave ZR1AOC, Kevin ZS1ABU, Danie ZS1DBJ, Saney ZR1S en Francois ZS1Q.

Hier volg ‘n kort opsomming van Saterdag se gebeure:

Nadat almal die nodige koppie koffie of cappuccino aangekoop het het hulle plekke ingeneem en het ons sonder enige seremonie of formalitiete die Koffie Drinkery afgeskop. Na die nodige blad skud en verwelkoming is elkeen bedank vir die moeite wat hul gedoen het om saam te kom kuier.

Nou ja die Rondomtalie/Round Robin is so bietjie eenkant toe geskuif en het ons lekker informeer gesels en beduie oor projekte, amateur radio gebeurtenisse en sommer oor alles en nog wat, maar was daar soos altyd ook die komiese en skertsende insette wat vir groot pret en n ontspanne atmosfeer gesorg het.

Ek het ook besluit om net ‘n kort samevatting te gee van gebeure. Weereens nie om die Koffie Drink en aanbiedinge/besprekings af te water nie, maar eerder om te vehoed dat manne by die huis bly en wag op ‘n volledige samevatting van gebeure. Soos ek al voorheen gese het as jy nie die koffie drink geleenthede bywoon nie, gaan jy baie mis. So vanaf Januarie 2020 net ‘n kort samevatting en natuurlik fotos. Ek wil ook van die geleentheid gebruik maak om elkeen te bedank wat insette, bydraes en wysheid met ons gedeel het by die samekoms.

Hoof besprekings/demonstrasies en bydraes gelewer deur:

Johan ZS1BVD George

  • Buck Converter Power Supply x 4 met 3D gedrukte projek kassie
  • Arduino Solar Water Verwarmer Kontroleerder. Johan se eie ontwerp met bypassende sleutelbord.
  • Selfontwerpte sleutelborde vir Arduino en ander projekte. Min drade is die bonus hier.
  • Raspberry Pi 4 met 3D gedrukte projek kassie en waaier.

Andre ZS1AFB George

  • DIY Selfoon/PWS Power Pack ingebou in Ammo kassie.

John ZS1ZR George

  • Spark Plug herwin uit die See.
  • Philips Tweede Wereld Oorlog Flitslig.
  • Rubber Patroon.

Danie ZS1DBJ George

  • DIY PCB Klamp/Houer Projek
  • ATiny selfontwerpte PCB en komponente Projek

Francois ZS1Q George

  • ViCom Electronics sluit Maart 2020. Huidige eienaar soek ‘n koper vir voorraad. Sou iemand belangstel kan hulle kom kontak.




Kevin ZS1ABU George

  • Kevin will be ordering HF Ferrite Toroids from RS Electronics should anyone be interested they can contact Kenvin.

Willie ZS2CC George en Johan ZS2I Mosselbaai

  • HF Toestande
  • 6M Band Openinge
  • Band toestande

Saney ZR1S Wilderness

  • 40m Beacon Update – Solar Panel and Battery
  • Unicyc le Construction Project

Algemene Besprekings

  • Eskom Kragonderbrekings
  • Vliegtuig Ongeluk – Ruiterbos Mosselbaai
  • Sluiting van AREDN Mossel Bay Mesh Netwerk
  • Amateur Radio Nood Kommunikasie - einde van ‘n era en staking van toekomstige hulp en bydraes deur Johan ZS1I Mosselbaai.
  • Oorname van amateur radio aktiwiteite deur jonger en nuwe radio amateurs in die Suid Kaap.
  • Johan ZS1I Kennisgewing: Besoek aan Australia – April tot Junie 2020. Reelings tov Koffie Drink Byeenkomste vir bogenoemde tydperke.

Die tyd het weereens eenvoudig net verby gevlieg en was dit tyd om te groet. Maar voor ek finaal groet eers woorde van dank. ‘n Hartlike dank aan die volgende persone:

1. Elke liewe radio- en voornemende radio amateur wat saam kom koffie drink het. Reboot Koffie Drink Geleenthede is nie ‘n “one man show” nie en wat ek daarby bedoel is dat julle wat kom koffie drink en die geleentheid bywoon sorg vir die sukses van die geleentheid wat ook die komiese insluit. Die kameraderie en vriendskappe wat gebou word is nie te versmaai in vandag se samelewing nie. Sonder elkeen se deelname hoe gering ook al sou die Koffie Drink nie ‘n sukses gewees het nie, baie dankie aan elkeen!!

2. Hartlike dank aan die eienaars van Root Coffee Roasters vir gebruik van hulle fasiliteite vir meer as twee ure. Julle koffie is puik.

3. Dankie aan die volgende persone wat fotos geneem het van die Koffie Drink en Projekte:

  1. Francois ZS1Q
  2. Andre ZS2AFB


Al wat oorbly is die volgende datum vir die Reboot Koffie Drink en dit sal gehou word te Mosselbaai op die 22 Februarie 2020 om 9vm te STARS Restaurant. Teken nou al die datum aan in julle dagboeke dat daar nie botsende belange is nie en dat jy die geleentheid kan bywoon.

73

Johan ZS1I
Mosselbaai
sawois05 AT gmail DOT com

Photos Album:









Thursday, November 28, 2019

Feedback: Reboot Amateur Radio WhatsApp Group – Reboot Coffee Drink Event 23 November 2019 9am STARS Restaurant, Mossel Bay

PDF copy available HERE

The Reboot Amateur Radio WhatsApp Group as well as the Reboot Coffee Drink Event is open to all radio amateurs and prospective radio amateurs in  South Africa.  All our events are informal !!  In other words no politics, no religion and no contraversial or personal differences will be allowed or tolerated!!




Saturday 23 November 2019 at 9am was again an enjoyable and successful Coffee Drink session in Mossel Bay at STARS Restaurant. We could not have asked for better weather. Once everybody bought the necessary refreshments which included a breakfast the chin-wagging started!

Those present by way of mind: = 8

John ZS1ZR, Nick ZS1N, Johann ZS2BVD, Mari ZS1MEH, Russel ZS2AHF, Casey ZS1AAS, Wessie ZS2A and Francois ZS1Q

Those present in the flesh: = 12

Beat ZS1HB, Johan ZS2I, Danie ZS1DBJ, Willie ZS2CC, Chris ZS1M, Hentie ZS1LH, Abe ZS1ZS, Jimmy ZS1RB, Dave ZR1OAC, Saney ZR1S, Kevin ZS1ABU and Johan ZS1I.

All present were welcomed by the administrator of the Reboot Amateur Radio WhatsApp Group. This time there were a few formalities that needed to be mentioned. The following were presented to those present:

  • Short summary of the 2019 Coffee Drink Events – Success recipe created by all the radio amateurs that attended these events.
  • Reboot WhatsApp Group – Activities, projects, DX and HF Band Conditions.
  • Public Interest re: Coffee Drink Events.
  • Projects – Wide variety and the most ever in the Southern Cape.
  • 2020 Coffee Drink Event dates.
  • Lucky Draws 2020.
  • Thanks and Appreciation.


It is impossible to provide all the finer and juicy details of this event. Moral of the story is to attend each and every coffee drink event, not to lose out.

Rondomtalie/Round Robin

  • Chris ZS1M – Show-cased a Homebrew 2 Meter Receiver build by a non active amateur radio operator. Freq. 145 – 146 Mhz.
  • Hentie ZS1LH – Cherrie Pi vs Raspberry Pi? Radio Control Aircraft Interference.
  • Kevin ZS1ABU – Relocation from Cape Town to George. VHF Contests – Piketberg. Demonstrated his Homebrew 2m/70cm Dipole Antenna.
  • Abe ZS1ZS - Showed pins for BNC connectors turned by Danie ZS1DBJ on the metal lathe. Overview of his Homebrew Receiver for the Es’hail-2 / QB-100 Satellite. He also provided information to those who would like to build a similar project. ZS6J – Johannesburg Club website contain information on the feedhorn construction. Abe also displayed his CW Keyer using a Arduino Mega 2560.
  • Beat ZS1HB – Discussed the modifications he made to his Kenwood TS50S for RS232 conversion to use with his Pactor Modem/Controller. Mod. Micro-computer Interface and Remote Control Interface build.
  • Saney ZS1S – Update on the 40m Beacon, Victron Regulator, Battery Back-Up and 2 mW output power. A big thank you to Casey ZS1AAS for doing the maintenance on the beacon.
  • Danie ZS1DBJ – Displayed the homebrew pre-amp project he and Willie ZS2CC played around with on the Icom 7000 Radio. Danie indicated that the pre-amp is noisy and did not perform well.
  • Dave ZR1AOC - The Icom 7000 is well known for microphone hick-ups. He suggested to Danie ZS1DBJ reset the radio to factory defaults and then try the pre-amp again. Dave has an Icom 7000 in his shack and the reset solved bad microphone issues.
  • Johan ZS2I, Jimmy ZS1RB, Johan ZS1I and Willie ZS2CC opted for the silent mode and enjoyed their coffee and refreshments.

Please see all the fotos of the above discussions and demonstrations. As said before you need to attend the coffee drink sessions to get the finer detail and juicy bits. If you do not attend you will miss out on detail.

Finally:

I concluded the event by thanking everyone for attending the event. A special word of thanks must go to Kevin ZS1ABU who on his first Coffee Drink, undertook the task to sort out the STARS account. (Not an enjoyable task at all.) Kevin’s willingness is highly appreciated.

I trust that everyone enjoyed the event and that everybody had a great time.

We look forward to the next Reboot Coffee event in 2020 which will be held in George on the 25 January 2020 at 9 am. The venue in George will be announced closer to the date.

73

Johan ZS1I
Mossel Bay
28 November 2019

Photos: 


Ragchewing

Inside view 2 Meter RX displayed by Chris ZS1M

Ragchewing

Front view 2 Meter RX displayed by Chris ZS1M

Back view 2 Meter RX displayed by Chris ZS1M

Inside view 2 Meter RX displayed by Chris ZS1M

Homebrew 2m/70cm Dipole Antenna by Kevin ZS1ABU

Complete Homebrew 2m/70cm Dipole Antenna by Kevin ZS1ABU.

Homebrew Receiver for the Es’hail-2 / QB-100 Satellite by Abe ZS1ZS

Homebrew Receiver for the Es’hail-2 / QB-100 Satellite by Abe ZS1ZS

Homebrew CW Keyer used with an Arduino Mega 2560 by Abe ZS1ZS

Homebrew CW Keyer used with an Arduino Mega 2560 by Abe ZS1ZS

Modification to Kenwood TS50S for RS232 conversion to use with his Pactor Modem/Controller by Beat ZS1HB.

Modification to Kenwood TS50S for RS232 conversion to use with his Pactor Modem/Controller by Beat ZS1HB. 

Homebrew Micro-computer Interface and Remote Control Interface build by Beat ZS1HB


Homebrew microphone pre-amp project by Danie ZS1DBJ

Homebrew microphone pre-amp project by Danie ZS1DBJ