Showing posts with label Echolink. Show all posts
Showing posts with label Echolink. Show all posts

Friday, June 26, 2020

Covid19 has changed the way we do certain things in Amateur Radio

Image: Bracknell Amateur Radio Club

As the title indicates, certain activities changed in Amateur Radio due to Covid19.   Whether some changes will be permanent in future need to be seen.  It is currently to early to come to any conclusions or final decisions.   However we must adapt to circumstances or be willing to sacrifice certain pleasures in Amateur Radio due to the Covid19 virus.

One such activity is monthly public  get togethers or club meetings.  In our area we have a club as well as a group of radio amateurs that get together.  The club has  quarterly meetings while the  Reboot Group get together on a monthly basis.  Since the pandemic outbreak started all meetings were stopped/postponed.  As the pandemic progress it is clear that it will take some time before we can hopefully safely get together again.

I suggested we use ZOOM at this time as to stay virtually in touch with each other even drinking a cup of coffee while in a ZOOM meeting.  What we have done before can now be done safely with ZOOM without the risk of getting infected.

Setting up a "studio" to broadcast meetings etc. is now underway and we will do the first test streaming on the 1 July 2020 at 19h30.  To make sure that the video quality will be acceptable I needed to install/gather equipment.  The three main "ingredients" for a good video broadcast is:  1.  Good Audio 2. Good Lighting and 3. Good Video.  Many of the equipment needed are currently not available due to the fact that the public bought most stock to stream various services etc.

I needed to think out of the box to get a simple yet acceptable small "studio" up and running with equipment on hand or easily available.  For audio I decided to invest in a USB microphone.  I do have an "elaborate" mixer, sound interface and dynamic microphones on hand but decided to buy the FiFine K669B microphone for ease of use and the availability of space.  This microphone is also used for WhatsApp,  Skype, Zoom, Echolink and AllStar and has shown to be a relative good cheap performer.


Setting up the microphone is a breeze and the final results are amazing for such an inexpensive microphone.

Good lighting was next on the list.  Now my space for a "studio" is very small and I needed to make sure that I do not clutter my work area even further with lights, mics, stands, cameras etc.  For lighting I chose a cheap Chinese LED light which already has a diffuser installed.   This light was manufactured to install into a ceiling and not on a tripod or overhead stand.  I modified the light and it can now be used in many formats.  I made a bracket that screws onto the back of the light.  This allows for easy fitting to any object or stand.  It is not the brightest of lights but will be used as a fill light.  I intend to use a three point light setup to start with.



Now this project is far from complete.  This topic will be updated as I progress with the project.  I am currently looking at building an overhead or wall mount stand which will hopefully also save on the amount of space.  To mount lights, cameras, and other accessories I need a sturdy overhead rig.  I have not yet decided on how I will build mine but have a few ideas up my sleeve.

I am busy constructing a swing arm that will be used to mount either a microphone or a camera.   It is sturdy enough for a microphone or a camera.  I still need to make the mount to attach to either a wall or overhead rig.  The images underneath depict the swing arm.




My green screen that I will be using on ZOOM and OBS under construction:




Busy constructing my H-Frame Light Stands:



Updates to follow as I continue with the project.  Please check back from time to time if you interested in Virtual Amateur Radio Meetings.

Thursday, May 21, 2020

Building the Reboot AllStar Link Network (ZS1I-L) in Mossel Bay

Image (Top):  Reboot AllStar Node

So, what is the Reboot AllStarLink Network all about?

AllStarLink is a network of Amateur Radio repeaters, remote base stations and hot spots accessible to each other via Voice over Internet Protocol. AllStarLink runs on a dedicated computer (including the Rasperry Pi) that you host at your home, radio site or computer center. It is based on the open source Asterisk PBX running our app_rpt application. App_rpt makes Asterisk a powerful system capable of controlling one or more radios. It provides linking of these radio "nodes" to other systems of similar construction anywhere in the world via VoIP.

AllStarLink's primary use is as a dedicated computer node wired to your repeater or radio. Connections from Echolink, other VoIP clients and telephone calls are suported. We also have a Java Applet which can be used on older computers to access AllStarLink nodes.

For more information on AllStar visit the following two links:


We are often asked why Allstar with all of the new RF digital repeaters and their VOIP connection schemes out there. The best answer is open source, quality audio, and freedom to do what you want. Dstar, Fusion, DMR, etc are all at least partially if not completely proprietary systems. In most cases the VOIP connection system that makes them somewhat like Allstar is proprietary. Code plugs, Rooms, etc. all make for a confusing and hard to maintain system. It also makes a system which is managed much like IRLP. The individual users has little control other than to connect somewhere. Then there is the lousy audio that goes along with the current Amateur Radio digital RF schemes.

Allstar connects RF systems with full duplex quality audio. It also gives the user a choice in how and where they connect. Private or public group or individual connections can be setup quite easily. If you are in a restricted living environment like a retirement home or HOA that does not allow antennas Allstar gives you the radio feel without an obtrusive antenna or big expense. You could setup a simplex node in your apartment or dwelling and have local coverage with in a few blocks to several miles between your handheld and you own personal node. Couple that with the ability to setup connections to all your buddies that also have nodes and you have your own talk group with everyone using real radios to access. You also have the ability to access via computer, phone, Echolink, and many other methods.

The advent of the inexpensive small board computers and very easy scripted setup make getting on Allstar easier than ever. A savvy user who has the ability to make some modifications and build some simple circuity could get on Allstar for well under R1650. A totally plug and play system minus the node radio would be no more than R850.

For repeater operators Allstar is a complete repeater controller that probably has more flexibility and capability than any repeater controller on the market. It is certainly cheaper. Because it runs in Linux and is open source the user has full flexibility to use scripts, timers, multiple ports, etc. to do just about anything they would want.

So if you like to call your own shots come join the friendly world of Allstar. You will be surprised how easy it is to get started and a world of adventure awaits you.

The Reboot Allstar build started way back in June 2019. 

AllStarLink Node Features:
  • Full Feature Repeater Controller
  • VoIP Full Duplex Linking with great audio
  • Frequency Agile Remote Base Station
  • Simplex (half-duplex) Station
  • Echolink
  • APRS
  • Autopatch
  • Based on Asterisk - the Open Source PBX
  • Real-time status reporting
It will be impossible to describe the complete build here but there is more than  enough information contained in the above links to construct your own AllStarLink System.  I will however illustrate the build with photos and notes of the build.

The Reboot Allstar Link  Network hardware used entails the following:
Information on the Reboot AllStar Link Network:

Call Sign:  ZS1I-L
Frequencies:  [1]  433.400 Mhz [2] 145.525 Mhz
AllStar Node Number:  49355
Echolink Node Number: 108551
Description:  AllStar Simplex Radio Node

How to use the Reboot AllStar Link Network.  Node#  49355:

It is quite simple.  If you use Echolink just connect to ZS1I-L and your audio will automatically be relayed to the Reboot AllStar Link. Use Echolink as you would for any other Echolink station.  If you use AllStar just connect to Node Number *349355.  Disconnect:  In Echolink use the disconnect button.  In AllStar use *149355.

Current DTMF Function Services for Reboot AllStar Link Network using Echolink, HT Radio, Zoiper, iaxrpt or IAX DV Switch. (Please note this is currently only basic services/features)

DTMF Function List:

*1  = Link Disconnect
*2  = Link Connect (Monitor Only, no TX)
*3  = Link Disconnect
*70  = Link Status
*75  = Full system status (all nodes)
*80  = System Info
*81  = Time and Weather Information for Mossel Bay

If you mobile/fixed in the area of Mossel Bay you can use a VHF/UHF Radio to connect to the Reboot AllStar Link Network.  Use the above DTMF function to firstly connect to *349355 and then to any other Echolink or AllStar node of you choice in the World.  UHF Frequency:  433.400 Mhz  / VHF Frequency 145.525 Mhz.

For those using APRS, the Reboot AllStar Link Network is also reflected on APRS-fi, call sign ZS1I-1  Information on the node numbers and radio frequencies are displayed.


Further updates related to functions/services are planned for the future.  Please feel free to use the Reboot AllStar Link Network at any time.  Just announce your call sign and intentions and enjoy the network.

Here is a few build images of the ZS1I-L NODE:



Image (Top):  Modifying the Baofeng 888


Image (Top):  Modifying the Baofeng 888


Image (Top):  Testing the StarTech USB Soundcard


Image (Top):  Completed StarTech Sound Card FOB


Image (Top):  Testing the StarTech Sound Card FOB


Image (Top):  Check the cabinet outlay.


Image (Top):  Check the cabinet outlay.


Image (Top):  Preparing the cabinet.


Image (Top):  Preparing the cabinet.


Image (Top):  Preparing the cabinet.


Image (Top):  Installing the modules.


Image (Top):  Installing the modules.


Image (Top):  Modules installed.




Image (Top):  Completed Reboot AllStar Project


Top Image Reboot AllStar Node Link in use. Johan ZS6IW connected to the node.